 |
SOLID 3/4"+ MAPLE CAP!
By customer request, this Agile is configured with the same features as the standard AL-3000 with the exception of the slim profile neck!
3/4" thick maple cap improves overall sound quality (increases brightness of the guitar)
Neck Taper (thickness) at the first fret is 17mm and 21mm at the 12th fret. (vs: 21.5 mm at the 1st fret and 23.5mm at the 12th fret for the standard AL-3000 model)
The Maple cap sits over the 1 1/2 2 piece solid Mahogany body (yes, even the black guitar has the maple cap)
Improve bridge (Gotoh GE103B-T) and tail (Gotoh GE101AM-T). Both in nickel.
Triple bound body, neck, and headstock
Improved Nickel plate hardware, including Nickel die-cast Grover tuners with 18-1 turning ratio for ultra fine tuning (Model 102-18N)
Two Type V Alnico humbucker pickups for warm, tradional sound
The AL-3000 now comes with improved wiring (single conductor braided 18 gauge American wire for pickups), improved pots (now higher voltage with brass shafts for reduced noise) and an improved pickup selector switch
Two volume and two tone controls, plus a three way pickup selector switch
One piece Mahogany set neck with 13.7" (350mm) radius neck for fast play and adjustable truss rod
Ebony fretboard with 22 Jumbo frets and real Abalone Trapezodial inlays
The AL-3000 features GHS strings installed at the factory and a professionally cut bone nut
A pre-cut graphite nut is also included in the bag with the trus rod adjuster for those who prefer graphite
Individually hand filed frets for professional feel and playability
Width of the neck at the nut: 1 5/8"; at the 21st fret: 2 3/16"
Overall length: 40"; Scale length: 24.7"
Body thickness: 2" at edge; Width at the widest point: 13"
Bridge pole spacing is 3", and the Tail piece pole spacing is 3 1/4"
Actual Weight is only 9.5 lbs
|
